Main Pages

Best Sellers

Screw and Plate Brass Castors

Screw and Plate Brass Castors

Budget range of imported antique style castors made in solid brass with solid brass wheels.
Size refers to the 'plate' and to the wheel diameter size.
Style may vary from picture









find out more

Magnetic Double Headed Hammer

Magnetic Double Headed Hammer

£12.75

The most important tool for an upholsterer. This high quality hammer has a forged fine grain high carbon steel head, one face being magnetic. hickory shaft.

find out more

Gimp Pins (50g pack)

Gimp Pins  (50g pack)

£1.90

These are very fine coloured tacks 13mm long. They are used for fixing your cover in awkward places when a tack may show, and for holding trimmings in place.
Available in a selection of colours and pack sizes.
find out more

10mm Tacks - Improved - 100g pack

£1.95

10mm - 3/8" Improved Tacks have a slightly thicker shank and a larger head. These are used for medium weight top covers , scrims and bottom cloths.



find out more

Barbours Upholstery Twine 20m Pack

Barbours Upholstery Twine    20m Pack

£3.25

A high quality linen Thread made from high grade fibre with a tight twist. Available in three weights THICK (6 cord) for tying springs and light lashing work. MEDIUM (4cords) for stitching edges, and THIN (3cords) for fine stitched edges abd hand sewing.
To improve the natural strength and grip, run the twine through beeswax before use.
find out more

Zig Zag Springs 8.5 gauge

Zig Zag Springs   8.5 gauge

£2.75

Zig Zag Springs (also known as No-sag or Serpentine springs are used a lot in modern furniture Above is a mock up of a correctly sprung seat. A minimum of 5 springs should be used under each seating area i.e. chair = 5 springs, 2 seater sofa =10 springs. However the more springs used the firmer the seat. When the springs are fitted across the seat they should be almost flat with just a slight dome upwards and all the springs should then be tied into place with laid cord, three rows across a normal size seat. This makes the springs act as a unit instead of individually, which can cause them to break easily. The springs are then covered with hessian and a padding—we recommend Typar Felt for this as it is very strong and easy to use. The seat can then be covered with calico and/ or your top cover. The springs are stocked in standard sizes but can be easily cut with a hacksaw if you need to adjust the size.
PRICE EACH
find out more

Mediumweight Calico (non FR)

Mediumweight Calico (non FR)

£5.20

Mediumweight Calico is ideal for covering the final stuffing when using traditional fillings, prior to fitting the top cover. Non FR
152cm wide (60")
PRICE PER METRE
find out more

Black and White Webbing 16.5 Metre Roll

Black and White Webbing   16.5 Metre Roll

£10.75

Also known as ’English Webbing’ This a superior webbing
made from jute and cotton in a strong twill weave.
Made in the UK
find out more

10mm Tacks - Fine - 100g pack

£1.95

10mm - 3/8" Fine Tacks are used for fitting calico and lightweight top covers.
find out more

15mm Tacks - Improved - 100g pack

£1.95

15mm - 5/8" Improved Tacks are used mainly for webbing.
find out more

Frames

Frames

Spoonback Chair Frame

Spoonback Chair Frame


Price: inc vat £110.00

Quantity:

Our unpolished beechwood frame can be traditionally upholstered, or upholstered using webbing and foam. The back is ideally shaped for deep buttoning. Overall size of frame 80cm high: 60cm wide: 65cm deep: Finished seat height about 34cm high
(Requires approx. 3.5 metres of fabric)
delivery 10/14 days

Jasmine Tub Chair Frame

Jasmine Tub Chair Frame


Price: inc vat £110.00

Quantity:

Like all our frames, this is made from beechwood with the joints screwed and glued to produce a strong, long lasting frame.
When upholstered, the sizes are aproximatly 82cm high at the back, 65cm wide overall and 60cm back to front.
The seat height is 43cm.
Requirs approx.3 - 3.5m of fabric
delivery 10/14 days

Wing Chair Frame

Wing Chair Frame


Price: inc vat £110.00

Quantity:

Based on the traditional Queen Anne Chair our unpolished beechwood frame makes an ideal upholstery project. Normally used with a cushion seat. Overall size of frame 96cm high: 75cm wide: 75cm deep: Seat height with a 10cm cushion about 45cm. Seat depth about 50cm
(Requires approx. 5 metres of fabric)
delivery 10/14 days

Frames